YG series roller track three phrase asynchronous mWUXI HONGTAI MOTOR CO., LTD.

Home >> Products >> YG series roller track three phrase asynchronous m

YG series roller track three phrase asynchronous m

Our YG series (H100-200) is a modified on the basis of JG2 series and referring to RM series of ABB Corp. It is new high reliable roller bed electromotor, which has many advantages such as small, light, excellent performance, reliable operating, and convenient maintenance. We add shaft albany grease at supply apparatus. The heat resistant lubricant we applied increases the strength of the machine. The complex technical economy index has up to the domestic leading level and is equal to the RM series roller bed electromotor of ABB Corp.

YG series roller bed electromotor can work under frequent startup and barking, corotation and counter-revolution, plugging and other impact loading and high temperature, dusty environment, it has relative high over loading capacity, and is the special electromotor for rolling mill roller bed and convance. Can be used as other machine as well.

The rating voltage of YG series roller bed electromotor is 380V, and the rating frequency is 50Hz, Y connection method, the insulation grade is H grade, safety grade is IP54, the installation form is B3, B5, B35, the cooling method is IC0041. The electromotor can directly startup under full pressure.

Under the control of VVVF, YG series roller bed electromotor can operate normally in the range of 5~70Hz, but the main performance index is different from the sample’s set guaranteed value.

YG series roller bed electromotor can be divided into two types:
Yga mainly used in working roller bed, character of service S540%
Ygb mainly used in convey roller bed, character of service S1
　

Main technical index:

Numbers of Poles	Number of Engine Base	YGa			YGb
Numbers of Poles	Number of Engine Base	rotate space （N.m）	rotate current（A）	trends constant （kg·m²/h）	power （kw）	rotate space （N.m）
112L1	4	22	13	90	1.2	18
112L2	4	32	17	130	1.8	28
112L1	6	20	8	205	0.85	17
112L2	6	30	11	280	1.25	25
132M1	6	48	18	300	1.8	42
132M2	6	63	24	375	2.4	56
160S1	6	90	27	490	3.2	80
160S2	6	120	35	640	4.2	105
160L1	6	160	47	930	5.6	140
160L2	6	200	64	1150	7.1	190
112L1	8	17	5.8	335	0.5	15
112L2	8	28	9	470	0.85	24
132M1	8	38	12	510	1.25	32
132M2	8	53	17	640	1.8	48
160S1	8	80	24	700	2.5	71
160S2	8	110	32	950	3.4	100
160L1	8	150	40	1160	4.5	135
160L2	8	200	52	1380	5.6	180
180L1	8	250	62	1540	6.7	210
180L2	8	300	73	1760	8.0	250
112L1	10	16	4.5	490	0.36	13
112L2	10	25	7.5	660	0.53	20
132M1	10	36	9	740	0.85	30
132M2	10	48	12	930	1.25	45
160S1	10	71	17	1150	1.8	60
160S2	10	100	23	1380	2.4	80
160L1	10	140	31	1760	3.2	120
160S2	10	190	39	2120	4.2	160
180L1	10	230	45	2350	5.3	200

Numbers of Poles	Number of Engine Base	YGa			YGb
Numbers of Poles	Number of Engine Base	rotate space （N.m）	rotate current （A）	trends constant （kg·m²/h）	power （kw）	rotate space （N.m）
180	10	280	56	2690	6.3	250
200	10	380	73	3050	7.1	320
200	10	450	90	3530	9	400
225	10	600	122	3550	11	500
225	10	750	145	4050	14	630
112	12	13	3	660	0.30	12
112	12	20	5	990	0.45	18
132	12	30	7.5	1050	0.63	26
132	12	42	11	1300	0.95	38
160	12	60	14	1550	1.3	53
160	12	90	19	1910	1.8	80
160	12	125	23	2400	2.6	110
160	12	170	32	2880	3.4	150
180	12	220	37	3340	4.2	200
180	12	280	47	3860	5.3	260
200	12	380	60	4290	6.3	320
200	12	450	72	5040	8.0	400
225	12	600	95	5050	9	500
225	12	750	125	5710	11	630
132	16	26	5.3	1910	0.36	22
132	16	36	7	2120	0.53	30
160	16	48	9.5	2500	0.71	42
160	16	71	13	3050	1.0	60
160	16	100	18	3990	1.5	80
160	16	125	21	4640	2.0	110
180	16	160	26	5270	2.5	150
180	16	210	32	6260	3.2	190
200	16	300	48	7100	4.2	250
200	16	400	60	8100	5.3	340
225	16	530	80	8310	6.7	450
225	16	670	100	9460	8.5	600
180	20	15	15	7850	1.0	90
180	20	150	21	8750	1.4	130
200	20	210	32	9750	2.2	180
200	20	300	46	11150	3.2	260
225	20	400	63	11760	4.2	340
225	20	530	76	1330	5.6	450

Remarks: the number 1,2 on the back of S, M, L represent two kinds of iron core of same number of engine base.

B3 type ( The engine base with bottom, without flange on end cover) Electromotor

Number of Engine Base	Number of Phase	Installation Size										Overall Size
Number of Engine Base	Number of Phase	A	A/2	B	C	D	E	F	G	H	K	AB	AE	AD	HD	L
YG112L	4.6.8.10.12	190	95	159	70	32	80	10	27	112	12	235	240	205	240	445
YG132M	6.8.10.12.16	216	108	178	89	38	80	10	33	132	12	265	265	220	265	495
YG160S	8.10.12.16	254	127	178	108	48	110	14	42.5	160	15	315	315	250	320	570
YG160L	8.10.12.16	254	127	254	108	48		14	42.5	160		315	315	250	320	690
YG180L	8.10.12.16.20	279	139.5	279	121	55		16	46	180		360	360	295	365	730
YG200L	10.12.16.20	318	159	305	133	65	140	18	58	200	19	415	415	320	415	780
YG225M	10.12.16.20	356	178	311	149	75	140	20	67.5	225	19	470	470	335	465	835

B5 type (The engine base without bottom, with flange on end cover) Electromotor
　

Number of Engine Base	Number of Phase	Installation Size										Overall Size
Number of Engine Base	Number of Phase	D	E	F	G	M	N	P	R	S	T	Numbers of hole	AE	AD	HF	L
YG112L	4.6.8.10.12	32	80	10	27	215	180	250	0	15	4.0	4	240	205	240	445
YG132M	6.8.10.12.16	38	80	10	33	265	230	300		15	4.0		265	220	285	495
YG160S	8.10.12.16	48	110	14	42.5	300	250	350		19	5.0		315	250		570
YG160L	8.10.12.16	48		14	42.5								315	250		690
YG180L	8.10.12.16.20	55		16	49								360	295	355	730
YG200L	10.12.16.20	65	140	18	58	400	350	450				8	415	320	450	780
YG225M	10.12.16.20	75	140	20	67.5	400	350	450				8	470	335	465	835

Remarks: 1. GE=D-G, the limit error of GE is (+0.200)
2. P size is the max limit value
3. R is the distant from flange fitting surface to shaft extension.
　

B5 type (The engine base without bottom, with flange on end cover) Electromotor
　

Number of Engine Base	Number of Phase	Installation Size															Overall Size
Number of Engine Base	Number of Phase	A	A/2	B	C	D	E	F	G	H	K	M	N	P	R	S	T	Num bers of hole	AB	AE	AD	HD	L
YG112L	4.6.8.10.12	190	95	159	70	32	80	10	27	112	12	215	180	250	0	15	4.0	4	235	240	205	240	445
YG132M	6.8.10.12.16	216	108	178	89	38	80	10	33	132	12	265	230	300		15	4.0		265	265	220	290	495
YG160S	8.10.12.16	254	127	178	108	48	110	14	42.5	160	15	300	250	350		19	5.0		315	315	250	345	570
YG160L	8.10.12.16	254	127	254	108	48		14	42.5	160									315	315	250	345	690
YG180L	8.10.12.16.20	279	139.5	279	121	55		16	49	180									360	360	295	365	730
YG200L	10.12.16.20	318	159	305	133	65	140	18	58	200	19	400	350	450				8	415	415	320	430	780
YG225M	10.12.16.20	356	178	311	149	75	140	20	67.5	225	19	400	350	450				8	470	470	335	465	835

      Remarks: 1. GE=D-G, the limit error of GE is (+0.200)
                       2. P size is the max limit value
                       3. R is the distant from flange fitting surface to shaft extension.
　

Back Catalog